Epson 2200 Service Manual - Page 27

EPSON Stylus PHOTO 2100/2200 FUNCTIONS AT POWER-ON Table 1-11. Power-on Functions Switch Function Paper switch Status printing *a Ink switch Roll paper switch Paper switch + Roll paper switch Roller cleaning mode *b Code Page/parallel interface 1284.4 operation mode selection *c Special setting mode *d *a : Any of the following operations is performed according to the value written to 5BH of the EEPROM. For details, refer to"Status Printing" on Page 30. 00h Firmware version, selected Code Page, Waste ink counter and nozzle test pattern are printed. 01h Hexadecimal dump mode *b : For details, refer to "Panel Operation in Roller Cleaning Mode" on Page 34. *c : For details, refer to "Default Setting Selection Function" on Page 28. *d : For details, refer to "Special setting mode" on Page 27. Revision B SPECIAL SETTING MODE To select the special setting mode, hold down the Paper switch and Roll paper switch and switch power on, and then press the following switches within the time when the Paper error indicator is blinking (for about 3 seconds). Table 1-12. Special Setting Mode *a Switch Function Paper switch EEPROM and Timer IC reset *b Roll paper switch (10 seconds) Waste ink counter reset *c *a : This operation resets the following data at the corresponding addresses of the EEPROM. • 26-27 Last cleaning time: 00, 00 • 28-29 Power off time: 00, 00 • 44 Interface selection: 00 (Auto) *b : For the initialized items, refer to "EEPROM Address Map" on Page 231. *c : The corresponding addresses of the EEPROM are 20-21. PRODUCTION DESCRIPTION Functions 27