Epson 2200 Service Manual - Page 29

Special Setting Mode Function - stylus photo printer ink

Page 29 highlights

EPSON Stylus PHOTO 2100/2200 1.3.6 Special Setting Mode Function EEPROM AND TIMER IC RESET By operating the panel at power-on, you can reset the EEPROM and Timer IC. Operating procedure Hold down the Roll paper switch and Paper switch, and switch power on. When the blink 2 of the Power and Paper LEDs and the blink of all Ink LEDs have started, release the Roll paper switch and Paper switch and press the Paper switch. *a The Power and Paper LEDs blink 2 and all Ink LEDs blink. The Power, Paper and all Ink LEDs are lit for 1 second. EEPROM and Timer IC reset ends and the printer starts. Revision B WASTE INK COUNTER RESET By operating the panel at power-on, reset the counter for waste ink. Operating procedure Hold down the Roll paper switch and Paper switch, and switch power on. When the blink 2 of the Power and Paper LEDs and the blink of all Ink LEDs have started, release the Roll paper switch and Paper switch and press the Roll paper switch. The Power, Paper and all Ink LEDs are lit for 2 seconds. The Power and Paper LEDs blink 2 and all Ink LEDs blink. (About 10 seconds) The Power LED, Paper LED and all Ink LEDs are lit. Waste ink counter reset ends and the printer starts. *a : If the switch is not pressed within the time when the Error LED is blinking (for 3 seconds), the printer starts normally. PRODUCTION DESCRIPTION Functions 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258

EPSON Stylus PHOTO 2100/2200
Revision B
PRODUCTION DESCRIPTION
Functions
29
1.3.6
Special Setting Mode Function
EEPROM AND TIMER IC RESET
By operating the panel at power-on, you can reset the EEPROM and Timer IC.
*a : If the switch is not pressed within the time when the Error LED is blinking
(for 3 seconds), the printer starts normally.
WASTE INK COUNTER RESET
By operating the panel at power-on, reset the counter for waste ink.
Operating procedure
Hold down the Roll paper switch and
Paper switch, and switch power on.
The Power and Paper LEDs
blink 2 and all Ink LEDs blink.
When the blink 2 of the Power and
Paper LEDs and the blink of all Ink
LEDs have started, release the Roll
paper switch and Paper switch and
press the Paper switch.
*a
The Power, Paper and all Ink LEDs are
lit for 1 second.
EEPROM and Timer IC reset
ends and the printer starts.
Operating procedure
Hold down the Roll paper switch and
Paper switch, and switch power on.
The Power and Paper LEDs
blink 2 and all Ink LEDs blink.
When the blink 2 of the Power and
Paper LEDs and the blink of all Ink
LEDs have started, release the Roll
paper switch and Paper switch and
press the Roll paper switch.
(About 10 seconds)
The Power LED, Paper LED and
all Ink LEDs are lit.
The Power, Paper and all Ink LEDs are
lit for 2 seconds.
Waste ink counter reset ends and
the printer starts.