Epson 2200 Service Manual - Page 211

EPSON Stylus PHOTO 2100/2200 5.2.13 IEEE-1394 ID Input This function is executed to make this product recognizable in the IEEE-1394 connection environment. 1. Select IEEE-1394 ID input in the adjustment program. 2. Enter the 10-digit code of the IEEE-1394 QR label applied to the rear left side as seen from the printer front. Enter the IEEE-1394 ID from left to right. IEEE-1394 QR label Revision B 5.2.14 First dot position adjsutment (Left/Right Margin Adjustment) This function is designed to adjust the print starting position in the CR main scanning direction. CHECK P O IN T Though the print starting position in the CR main scanning direction is fixed to each model, this function is used to make adjustment only when a complaint is filed in repairing. Input sequence 1. Choose Left/right margin adjustment in the adjustment program. 2. Click the Print button to print, and determine the correction value in the shifting direction for the pattern printed on the left margin. Correction can be made in 0.0088mm increments for the correction value of 1. Figure 5-26. QR Label CHECK P O IN T " When replacing the Mechanism, basically peel off the IEEE1394 label carefully from the old Mechanism and apply it to the position of the new Mechanism shown above. In the ASP mechanism where the IEEE1394 label is applied in the specified position, it is also recommended to peel the label of the old Mechanism and apply it to the specified position of the ASP mechanism (new Mechanism). If the IEEE-1394 ID code has changed before and after repair, the printer is recognized as a new output terminal when it is connected to the user PC, and a new port driver is generated. In this case, the registry area of the user PC may be reduced. Therefore, we recommend you to use the above servicing method. ADJUSTMENT Adjustments 211