Epson 2200 Service Manual - Page 72

EPSON Stylus PHOTO 2100/2200 Revision B Printer Condition Paper Jam Error Power - Indicators Paper Blink Table 3-1. Error Indications and Fault Occurrence Causes Ink 1-7 - EPSON Printer Window 3 Fault Occurrence Cause This error is detected when the paper remaining near the PE sensor cannot be ejected in the paper loading sequence, or if the paper near the PE sensor cannot be ejected with the FF command or Paper switch. Paper Gap Error - On - This error is detected if the printer judges that the Carriage made contact with the paper, which was fed from the Paper guide manual (Board paper feeding port), at the time of paper width detection. "-" Blink Blink 2 : don't care : 0.5sec on + 0.5sec off repetition : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition High speed Blink Blink alternately 1 Blink alternately 2 : 0.1sec on + 0.1sec off repetition : 0.5sec on + 0.5sec off repetition : 0.5sec on + 0.5sec on repetition TROUBLESHOOTING Error Indications and Fault Occurrence Causes 72