Epson 2200 Service Manual - Page 177
In the ASP structure, the PF Roller Unit consists of the PF Roller, Refer
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
EPSON Stylus PHOTO 2100/2200 Revision B C A U T IO N " Since the joggle of the Bush 12 is easily damaged, fully be careful when removing and reinstalling it. Refer to Figure 4-128, "Removing the PF Roller". " When sliding the PF Roller, fully take care so that the coating of the PF Roller is not peeled off by the Lower Driven Roller and by the hook on the left side of the PF Roller Support Lever as seen from the printer front. Refer to Figure 4-127, "Removing the Extension Spring 9.65". 9. After sliding the PF Roller to the top front as viewed from the printer front, lift and remove it from the Left Frame. C A U T IO N " When removing the PF Roller, fully be careful not to scratch the PF Loop Scale. Refer to Figure 4-128, "Removing the PF Roller". " When handling the PF Roller, wear gloves since the paper loading accuracy will decline if you touch its surface directly with bare hands. Refer to Figure 4-128, "Removing the PF Roller". " When cleaning the surface, use a soft, clean brush. Refer to Figure 4-128, "Removing the PF Roller". CHECK P O IN T In the ASP structure, the PF Roller Unit consists of the PF Roller and Spur Gear 76 (including the Bush 12) and does not include the PF Scale. Place an order for the PF Scale as required. A D JU S TM E N T R E Q U IR E D " When changing the PF Roller, the following adjustments are necessary. Make the adjustments in the following order. 1. PG adjustment 2. CR tooth skip prevention mechanism adjustment 3. Head cleaning 4. Head angular adjustment 5. Bi-D adjustment 6. PF adjustment " Refer to "Chapter 5 Adjustment" for the adjustment procedures. " After changing the following parts for new ones, always apply grease G-26 in the specified positions. • Bush 12 (Right): Refer to Chapter 6, Figure 6-3, "Lubrication Point 1". • Rear Paper Guide: Refer to Chapter 6, Figure 6-8, "Lubrication Point 10". • PF Roller and PF Grounding Spring: Refer to Chapter 6, Figure 6-8, "Lubrication Point 10". • Front Paper Guide: Refer to Chapter 6, Figure 6-12, "Lubrication Point 14". DISASSEMBLY AND ASSEMBLY Disassembly 177