Epson 2200 Service Manual - Page 181

EPSON Stylus PHOTO 2100/2200 A D JU S TM E N T R E Q U IR E D " When removing the Paper Eject Roller Shaft A, the following adjustments are necessary. Make the adjustments in the following order. 1. PG adjustment 2. CR tooth skip prevention mechanism adjustment 3. Head cleanig 4. Head angular adjustment 5. Bi-D adjustment 6. Pixel Shift Adjustment 7. PF adjustment " Refer to "Chapter 5 Adjustment" for the adjustment procedures. " After changing the Grounding Spring for a new one, always apply grease G-26 in the specified position. Refer to Chapter 6, Figure 6-7, "Lubrication Point 9". 4.2.17 Removing the PF Roller Support 1. Remove the PF Roller. (Refer to 4.2.15.) 2. Remove the Under Driven Roller. Revision B Under Driven Roller Figure 4-136. Removing the Under Driven Roller 3. Remove the two screws 6) C.B.S 3×6 (9±1kgf.cm) that secure the PF Roller Support, and slide the PF Roller Support to the top to remove it from the Upper Frame. Hook Joggle Hook C.B.S 3x6 C.B.S 3x6 Hook PF Roller Support Figure 4-137. Removing the PF Roller Support Hook DISASSEMBLY AND ASSEMBLY Disassembly 181