Epson 2200 Service Manual - Page 127
Removing the Board Assembly
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
EPSON Stylus PHOTO 2100/2200 Revision B 4.2.2 Removing the Board Assembly 4.2.2.1 Removing the Panel Board 1. Remove the Upper Housing. (Refer to 4.2.1.1.) 2. Remove the three screws 5) C.B.P 3×10 (6±1kgf.cm) that secure the Grounding Plate and Panel Board, and remove the Grounding Plate and Panel Board from the Upper Housing. Grounding Plate C.B.P 3×10 Panel Board C.B.P 3×10 4.2.2.2 Removing the Board Unit 1. Remove the Rear Housing. (Refer to 4.2.1.2.) 2. Remove the five screws 6) C.B.S 3×6 (9±1kgf.cm) and one screw 2) C.B.S 3×10 (9±1kgf.cm) that secure the Board Unit, slightly pull the Board Unit to the front as viewed from the printer rear, and disengage the Ferrite Cores located on the Lower Frame and Board Unit side using a flat-blade screwdriver. C.B.S 3×6 Rear right side 35 1 2 4 Board Unit C.B.S 3×10 Figure 4-13. Screws That Secure the Grounding Plate and Panel Board Ferrite Cores Figure 4-14. Screws That Secure the Board Unit DISASSEMBLY AND ASSEMBLY Disassembly 127