Epson 2200 Service Manual - Page 87
Table 3-6., Phenomenon-Based Paper Jam Error Check Points, Install the Sensor base correctly.
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
EPSON Stylus PHOTO 2100/2200 Revision B Occurrence Timing Phenomenon Detail At power-on At power-on, the PF roller turns (ASF, board paper continuously for several seconds. feed mode only) Table 3-6. Phenomenon-Based Paper Jam Error Check Points Faulty Part/ Part Name PE sensor Check Point Remedy 1. Check the paper detection area of the PE sensor for paper dust or 1. Remove the paper dust and/or foreign matter foreign matter. from the detection area. Torsion spring Detection lever At operation At the time of paper ejection, the PF roller advances the paper but cannot eject it completely. Sensor base 2. Check that the PE sensor detection lever is in the proper position. 3. Check that the Sensor base is mounted to the Mechanical frame correctly. 4. Move the Detection lever actively by hand in the same state as when the paper passes, and check that the Detection lever is returned to the original position automatically by the Torsion spring when released. 2. Install the PE sensor detection lever in the correct position. 3. Install the Sensor base correctly. 4. Change the PE sensor for a new one. - 1. Check that the paper size used in the printer is not larger than the 1. Since the paper length is larger than the paper size set on the driver side. specifications, notify the user. TROUBLESHOOTING Troubleshooting 87