Epson 2200 Service Manual - Page 25
Release Lever, Release Lever Positions, Table 1-9. - stylus photo errors
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
EPSON Stylus PHOTO 2100/2200 1.2.5 Release Lever On this printer, set the Release lever as indicated in the following table depending on the used paper type. Table 1-9. Release lever Setting Paper Release lever Position Gap Correction Cut sheet, OHP, Label, Roll paper Front side position 0mm Envelope, Board paper First step from front position +1.3mm CD-R tray *a Second step from front position +2.7mm - Far side position *b - *a : When the CD-R tray is loaded, any position other than the second step from the front position will result in a release lever error. *b : The far side position of the Release lever is used when placing thick paper (board paper) or CD-R tray. After placing thick paper or CD-R tray, move the release lever to the appropriate position. Revision B Figure 1-12. Release Lever Positions PRODUCTION DESCRIPTION Basic Specifications 25