Epson 2200 Service Manual - Page 210

EPSON Stylus PHOTO 2100/2200 Revision B 5.2.11 Cut Position Adjustment This adjustment is made to correct the roll paper cut position accuracy when the Auto cutter is fitted. CHECK P O IN T " Perform this adjustment only when the Auto cutter of the user is packed with the product to be repaired. " This adjustment can also be made from the printer driver utility. " Before starting this adjustment, set the Auto cutter and roll to the printer. 1. From the adjustment program, click the Print button to print the check patterns. The roll paper is transferred and the Auto cutter cuts the print patterns automatically. 5.2.12 USB ID Input This function is executed to make this product recognizable if it is connected to the PC via a USB hub. 1. Select USB ID input in the adjustment program. 2. Enter the 10-digit serial number from the label applied to the bottom side of the Rear housing. Serial number 1234567890 Figure 5-25. Serial Number Figure 5-24. Roll Cut Position Adjustment Patterns 2. Choose the pattern number whose cut position is the closest to the color boundary position of each pattern, and enter it from the program. The correction value is saved into the EEPROM. ADJUSTMENT Adjustments 210