Epson 2200 Service Manual - Page 158

EPSON Stylus PHOTO 2100/2200 4.2.10 Removing the Ink System Unit CHECK P O IN T The Ink System Unit consists of the Cap Unit, Pump Unit and Head Cleaner. 1. Remove the Printer Mechanism. (Refer to 4.2.1.4.) 2. Move the Carriage Unit to the center. 3. Remove the four screws 6) C.B.S 3×6 (9±1kgf.cm) that secure the Ink System Unit. C.B.S 3×6 4 3 Ink System Unit 2 C.B.S 3x6 1 Figure 4-83. Removing the Ink System Unit Fit the screws 6) C.B.S 3×6 in the order shown in Figure 4-83. Revision B 4. Remove the three hooks, which secure the Cap Unit, from the I/S Frame, remove the one projection on the Head Cleaner side from the Cap Unit, remove the Ink Tube connection from the Pump Tube, and remove the Cap Unit. I/S Frame Cap Unit Projection Hooks Pump Tube Ink Tube Ink Tube connection Figure 4-84. Removing the Cap Unit C A U T IO N When removing the Ink Tube from the Pump Tube, be careful of ink leakage. Figure 4-84, "Removing the Cap Unit". DISASSEMBLY AND ASSEMBLY Disassembly 158