Epson 2200 Service Manual - Page 216
Service Maintenance - cleaning kit
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
EPSON Stylus PHOTO 2100/2200 ! Paper eject rollers If ink is transferred from the Paper eject rollers to a sheet of plain paper other than the Epson-specified paper during printing of a pattern as shown in Figure 6-2, moisten the cleaning pad with water using the supplied cleaning kit, then start the roller cleaning mode, and apply the cleaning pad to the Paper eject rollers to clean them. (Refer to 1.3.11 "Panel Operation in Roller Cleaning Mode" on page 34.) Paper feeding direction Figure 6-2. Printing Pattern Where Paper Eject Roller Marks Occur Revision B 6.1.3 Service Maintenance If print irregularity (missing dot, white line, etc.) has occurred or the printer indicates "Maintenance Error", take the following actions to clear the error. 6.1.3.1 Head Cleaning: The printer has a built-in head cleaning function, which is activated by operating the control panel. ! Confirm that the printer is in stand-by state The POWER indicator is not blinking ! Hold down the Ink SW on the control panel for more than 3 seconds. The POWER indicator blinks during the cleaning sequence. * For head cleaning, it is recommended to alternate the nozzle check pattern and cleaning to minimize ink consumption. MAINTENANCE Overview 216