Epson 2200 Service Manual - Page 151

EPSON Stylus PHOTO 2100/2200 Revision B 6. Lift the right end of the Carriage Guide Shaft B as seen from the printer front, remove the Sub Shaft Fixing Plate (Right) from the hook of the Right Frame, and turn the Sub Shaft Fixing Plate (Right) to remove it from the Carriage Guide Shaft B. Sub Shaft Fixing Plate (Right) Carriage Guide Shaft B Hook Figure 4-69. Removing the Sub Shaft Fixing Plate (Right) When reinstalling the Sub Shaft Fixing Plate to the Carriage Guide Shaft B, insert the leg of the Carriage Guide Shaft B in the direction shown in Figure 4-70 and then turn it. Sub Shaft Fixing Plate Carriage Guide Shaft B Figure 4-70. Reinstalling the Sub Shaft Fixing Plate 7. Slide the Carriage Guide Shaft B to the right as seen from the printer front, then remove the left end from the Frame, and remove the Carriage Guide Shaft B to the diagonal top left of the Printer Mechanism. C A U T IO N " When removing the Carriage Guide Shaft B, fully take care not to scratch it. Refer to Figure 4-69, "Removing the Sub Shaft Fixing Plate (Right)". " Removing the Carriage Guide Shaft B brings the Carriage Unit into contact with the Front Paper Guide. Therefore, when the Printhead is installed on the Carriage Unit, remove the Carriage Shaft B after moving the Carriage Unit to the home position. " Make sure that the left end of the Carriage Guide Shaft B is in order of the Bush, Sub Shaft Fixing Plate (Left), Plain Spring and Leaf Spring. Refer to Figure 4-71, "Order on Left End of Carriage Guide Shaft B". Sub Shaft Fixing Plate (Left) Leaf Spring×2 Bush Plain Spring Figure 4-71. Order on Left End of Carriage Guide Shaft B " After reinstalling the Carriage Guide Shaft B, always make sure that the Sub Shaft Fixing Plate is mounted correctly. Refer to Figure 4-69, "Removing the Sub Shaft Fixing Plate (Right)". DISASSEMBLY AND ASSEMBLY Disassembly 151