Epson 2200 Service Manual - Page 134

EPSON Stylus PHOTO 2100/2200 4.2.4.1 Disassembling the ASF Unit 1. Remove the ASF Unit. (Refer to 4.2.4.) 2. Remove the one screw 8) C.B.P 3×6 (6±1kgf.cm) that secures the Paper Guide Support. 3. Release the two joggles of the Paper Guide Support with tweezers or like, and while pulling the Paper Guide Support slightly to the front as viewed from the ASF Unit rear, lift it up to release the three hooks, and remove the Paper Guide Support. Paper Guide Support C.B.P 3×6 Revision B 4. Remove the Extension Spring 0.088 hitched on the Right Lever Hopper Cam as viewed from the ASF Unit front, and remove the Right Lever Hopper Cam from the ASF Unit. C A U T IO N When removing the Extension Spring 0.088, fully use care not to lose it. Refer to Figure 4-29, "Removing the Lever Hopper Cam/Spur Gear 32". 5. Release the one hook that secures the Spur Gear 32, and remove the Spur Gear 32 from the LD Roller Shaft. Hook Right Lever Hopper Cam Joggle Hooks Joggle Figure 4-28. Removing the Paper Guide Support Spur Gear 32 Extension Spring 0.088 Figure 4-29. Removing the Lever Hopper Cam/Spur Gear 32 DISASSEMBLY AND ASSEMBLY Disassembly 134