Epson 2200 Service Manual - Page 155

EPSON Stylus PHOTO 2100/2200 Revision B 14. Remove the one screw 9) C.B.S (P4) 3×6 (6±1kgf.cm) that secures the Right Adjust Parallelism Bush, and while pulling the upper side (tooth surface) of the Right Adjust Parallelism Bush to the front slightly as viewed from the printer right side, turn it counterclockwise to release the two hooks, and then remove the Right Adjust Parallelism Bush. C.B.S(P4) 3×6 15. Release the Shaft Fixing Plate (Right) from the joggle on the right of the Frame, and turn it to remove from the Carriage Guide Shaft A. Carriage Guide Shaft A Shaft Fixing Plate (Right) Hooks Printer right side Figure 4-77. Removing the Right Adjust Parallelism Bush Joggle Figure 4-78. Removing the Shaft Fixing Plate (Right) 16. Slide the Carriage Guide Shaft A to the right as seen from the printer front to remove its left end from the Frame. DISASSEMBLY AND ASSEMBLY Disassembly 155