Epson 2200 Service Manual - Page 162

EPSON Stylus PHOTO 2100/2200 Revision B 4.2.12.2 Removing the ASF Sensor 1. Remove the ASF Unit. (Refer to 4.2.4.) 2. Remove the ASF Sensor Wheel of the ASF Unit. (Refer to Steps 5 to 8 in 4.2.4.1.) 3. Release the two hooks that secure the ASF Sensor with tweezers or a flat-head screwdriver, and slide and remove the ASF Sensor to the bottom left as seen from the left side of the ASF Unit. Hook ASF Sensor Cutout 4.2.12.3 Removing the PF Encoder Sensor 1. Remove the Rear Housing. (Refer to 4.2.1.2.) 2. Remove the Middle Housing. (Refer to 4.2.1.3.) 3. Release the one hook that secures the PF Encoder Frame to the Frame, and while extending the Lower Housing outward, remove the PF Encoder Frame. 4. Remove the FFC that is connected to the PF Encoder. FFC Lower Housing Hook Hook Figure 4-92. Removing the ASF Sensor When reinstalling the ASF Sensor, fist insert the cutout into the ASF Frame and push the two hooks in. Refer to Figure 4-92, "Removing the ASF Sensor". PF Encoder Frame Figure 4-93. Removing the PF Encoder Frame DISASSEMBLY AND ASSEMBLY Disassembly 162