Epson 2200 Service Manual - Page 186

EPSON Stylus PHOTO 2100/2200 4.2.19 Fitting the Protective Materials This section describes how to fit the protective materials that are needed when returning the printer to the user. 1. Fit a protective material between the I/C Cover and Carriage Unit, and apply a blue tape from the Carriage Unit to the I/C Cover and to the right side (as seen from the printer front) of the Upper Housing to fix the Carriage Unit. Blue tape Revision B 3. Apply blue tapes to two areas of the Upper Housing and Stacker to fix them. Blue tapes Figure 4-147. Fixing the Carriage Unit 2. Insert protective materials into the first and third stages of the Stacker and also insert a protective material into between the Stacker and Middle Housing. Figure 4-149. Fixing the Upper Housing and Stacker 4. Apply blue tapes to the left and right of the Rear Housing and Middle Housing to fix them. Protective material Figure 4-148. Fixing the Stacker Protective materials Blue tape Figure 4-150. Fixing the Rear Housing and Middle Housing DISASSEMBLY AND ASSEMBLY Disassembly 186