Epson 2200 Service Manual - Page 144
Removing the Paper Eject Roller B, Removing the Lower Paper Guide Eject
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
EPSON Stylus PHOTO 2100/2200 Revision B 4.2.6 Removing the Paper Eject Roller B 1. Remove the Paper Eject Unit. (Refer to 4.2.5.) 2. Return the Carriage Unit to the home position. 3. Release the four hooks, which secure the rear side of the Lower Paper Guide Eject as seen from the printer front, from the Paper Eject Roller A, and turn it toward the front. 4. Release the five hooks, which secure the front side of the Lower Paper Guide Eject as seen from the printer front, from the Paper Eject Roller B, and remove the Lower Paper Guide Eject. 5. Remove the C Ring of the Spur Gear 62 mounted on the left end of the Paper Eject Roller B, as seen from the printer front, from the Paper Eject Roller B, and then remove the Spur Gear 62. Spur Gear 62 C Ring Paper Eject Roller A Rear hooks Front hooks Convex portion Front hooks Paper Eject Roller B Figure 4-52. Removing the Lower Paper Guide Eject When reinstalling the Lower Paper Guide Eject, match the convex portion on the rear center side, as seen from the printer front, with the notch of the specified hook on the right center side of the Front Paper Guide. Refer to Figure 4-52, "Removing the Lower Paper Guide Eject". Figure 4-53. Removing the Spur Gear 62 C A U T IO N " When removing the C Ring, fully take care not to lose it. Refer to Figure 4-53, "Removing the Spur Gear 62". " Since the Spur Gear 62 is a precision gear, change it for a new one once it has been removed. Refer to Figure 4-53, "Removing the Spur Gear 62". " When reinstalling the Spur Gear 62 to the Paper Eject Roller B, hold the center of the Spur Gear 62 and carefully mount it to the Paper Eject Roller B. If you hold the periphery of the Spur Gear 62 when mounting, it will deform and the paper loading accuracy will reduce. Refer to Figure 4-53, "Removing the Spur Gear 62". " When reinstalling the Spur Gear 62, it is recommended to press- fit the Spur Gear 62 into the Paper Eject Roller B using a mounting plate scale jig. DISASSEMBLY AND ASSEMBLY Disassembly 144