Epson 2200 Service Manual - Page 147

EPSON Stylus PHOTO 2100/2200 When removing the Torsion Spring 66, hitch the longer end of the Spring on the front center side hook of the Carriage Unit and on the left side hook of the Carriage Unit, and the shorter end on the Head Fastener. Refer to Figure 4-59, "Reinstalling the Torsion Spring 66". Revision B 9. Slide the Head Fastener to the left as viewed from the printer front, pull the right end to the diagonal top right of the Carriage Unit, and remove the Head Fastener. 10. Slide the Printhead to the front as seen from the printer front, and remove and lift it from the two hooks of the Carriage Unit. Hooks Printhead Hook Hook Head Fastener Figure 4-59. Reinstalling the Torsion Spring 66 8. Lift the two overlapping Sus-Plates with pliers or like, and remove them from the Carriage Unit. Figure 4-61. Removing the Head Fastener 11. Remove the two Head FFC Guides from the Printhead, and remove the Printhead. Sus-Plate Head FFC Guides Figure 4-60. Removing the Sus-Plates DISASSEMBLY AND ASSEMBLY Disassembly Figure 4-62. Removing the Printhead 147