Epson 2200 Service Manual - Page 148

EPSON Stylus PHOTO 2100/2200 C A U T IO N . " When reinstalling the Printhead, fully take care not to bring the Nozzle surface into contact with the Carriage Unit. Refer to Figure 4-62, "Removing the Printhead". " After removing the Printhead (when not changing it), place it so that the Head surface does not make contact with the desktop. Refer to Figure 4-62, "Removing the Printhead". " Refer to Figure 4-63 for the way to route the Head FFC Guides. " When reinstalling the Head FFC Guides, fully be careful not to bend or damage the FFCs. (Especially the two places in the right photo in Figure 4-63.) " Place the Head FFCs in the return portion on the right and rear sides of the Carriage. Refer to the right photo in Figure 4-63, "Routing the Head FFC Guides". Portions to be noted Revision B A D JU S TM E N T R E Q U IR E D After removing or changing the Printhead, adjustments are necessary. Always make adjustments in the following order. " When the Printhead was removed 1. Head cleaning 2. Head angular adjustment 3. Bi-D adjustment 4. Pixel Shift Adjustment " When the Printhead was changed 1. Ink charge 2. Head ID input 3. Head angular adjustment 4. Bi-D adjustment 5. Pixel Shift Adjustment 6. PG adjustment Refer to "Chapter 5 Adjustment" for the adjustment procedures. Carriage Unit top Figure 4-63. Routing the Head FFC Guides DISASSEMBLY AND ASSEMBLY Disassembly 148