Epson 2200 Service Manual - Page 83

EPSON Stylus PHOTO 2100/2200 Revision B Occurrence Timing Phenomenon Detail At operation When the Paper switch was pressed, the LD rollers attempt to feed paper but the paper is not fed. Table 3-5. Phenomenon-Based Paper Out Error Check Points Faulty Part/ Part Name ASF unit Check Point Remedy 1. Check the Paper feed mechanism of the ASF unit for paper dust or foreign matter. 1. Using a cleaning sheet, clean the Paper feed mechanism and Paper eject mechanism. The procedure is as follows. 1 Place the cleaning sheet upside down and put it into the ASF unit. 2 Press the Paper switch to start paper feed. 3 Repeat the above steps several times. * To remove persistent contamination, staple an alcohol-dampened cloth to a postcard and clean the rollers in the following method. Cleaning sheet Postcard used as mount Non-adhesive part Adhesive part This side down Stapling Cloth damped with alcohol 1 Place the alcohol-dampened cloth toward the LD roller surface of the ASF. 2 Hold the mount top end securely and press the Paper feed switch. 3 Repeat the paper feed sequence several times to clean the LD roller surface of the ASF. TROUBLESHOOTING Troubleshooting 83