Epson 2200 Service Manual - Page 77

EPSON Stylus PHOTO 2100/2200 Revision B Printer Condition Maintenance Request Table 3-1. Error Indications and Fault Occurrence Causes Indicators Power Paper Ink 1-7 Off Blink alternately 1 Blink alternately 2 EPSON Printer Window 3 Fault Occurrence Cause This error is detected when the Waste ink counter A0 stored in the EEPROM reaches the limit (60352 points). The error detection timing is as follows. • At power-on • At data transmission • At cleaning • At flushing Fatal Error Off High speed Blink High speed Blink This error is detected in any of the following cases. 1. The CR unit does not operate properly due to external force in any sequence/operation. 2. The PF motor does not rotate properly during PF motor operation. 3. The home position cannot be detected by the ASF sensor. "-" Blink Blink 2 : don't care : 0.5sec on + 0.5sec off repetition : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition High speed Blink Blink alternately 1 Blink alternately 2 : 0.1sec on + 0.1sec off repetition : 0.5sec on + 0.5sec off repetition : 0.5sec on + 0.5sec on repetition TROUBLESHOOTING Error Indications and Fault Occurrence Causes 77