Epson 2200 Service Manual - Page 33
Panel Operation for CD-R Printing, The Paper LED blinks fast.
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
EPSON Stylus PHOTO 2100/2200 1.3.9 Panel Operation for CD-R Printing The following indicates the basic panel operating procedure for printing on CD-R. Operating procedure 1. Move the Release lever to the farthest position. 2. Along the paper feed guide, put the CD-R tray folder into the printer front and push the CD-R tray into the specified position toward the printer rear. *a 3. Return the Release lever to the original position. *a The Paper LED blinks fast. If the print data has already been sent, print operation is stopped temporarily. The Paper LED stops blinking fast. 4. Press the Paper switch. *b 5. Send the print data. The CD-R tray is fed automatically. If it is not fed properly, the CD-R tray is ejected to the front and a paper feed error occurs. After printing is over, the CD-R tray is ejected. *a : If power is switched off and then on again at this point, the CD-R tray is not ejected and a paper jam error occurs. When you further press the Paper switch, the CD-R tray is ejected to the front and the printer returns to the normal mode. *b : If power is switched off and then on again at this point, the CD-R tray is ejected to the front and the printer returns to the normal mode. Revision B 1.3.10 Panel Operation for Thick Paper Printing The following indicates the basic panel operating procedure for printing on thick paper. Operating procedure 1. Move the Release lever to the farthest position. 2. Along the paper feed guide, insert the thick paper into the printer rear. 3. Return the Release lever to the original position. The Paper LED blinks fast. If the print data has already been sent, print operation is stopped temporarily. Insert the thick paper along the right end of the paper feed guide. *a The Paper LED stops blinking fast. 4. Press the Paper switch. *b 5. Send the print data. The thick paper is fed automatically. If it is not fed properly, a paper feed error occurs, or if the CR interferes with the thick paper, a paper thickness error occurs. After printing is over, the thick paper is ejected. *a : If power is switched off and then on again at this point, the thick paper is not ejected and a paper jam error occurs. When you further press the Paper switch, the thick paper is ejected and the printer then returns to the normal mode. *b : If power is switched off and then on again at this point, the thick paper is ejected and the printer returns to the normal mode. PRODUCTION DESCRIPTION Functions 33