Epson 2200 Service Manual - Page 117

EPSON Stylus PHOTO 2100/2200 Revision B C A U T IO N " When the printer model uses the HAV ink cartridges, transport it after removing the ink cartridges. Especially for air transportation, always remove the ink cartridges before transportation since ink will flow into the cap via the head with the reduction of the atmospheric pressure, causing ink leakage. " Use only the recommended tools for disassembly, reassembly and adjustment. (Refer to Table 4-1"Tool List".) " Tighten screws to the specified torques. " Use the specified lubricants and adhesives. (Refer to Chapter 6 "Maintenance".) " Make the necessary adjustments under the instructions given for disassembling. (Refer to Chapter 5 "Adjustment".) " When reassembling the waste ink pads and tray, always make sure that the waste ink tube is fitted correctly in the specified place. Fitting the ink tube in other than the specified position can cause ink leakage. Ink tube 4.1.2 Tools to Be Used The following table indicates the tools recommended for use for disassembly, reassembly and adjustment. Table 4-1. Tool List Tool Name Supplier Scale PF unit applying jig EPSON Mounting plate scale jig EPSON Phillips Screw Driver (No.1) # Phillips Screw Driver (No.2) # Tweezers # PG adjustment gauge set Nippers EPSON # Code 1051767 1051765 B743800400 B743800200 B741000100 1113311 B7405001 NOTE: #:Available Waste ink pad Figure 4-1. Position Specified for Ink Tube DISASSEMBLY AND ASSEMBLY Overview 117