Epson 2200 Service Manual - Page 76

EPSON Stylus PHOTO 2100/2200 Revision B Printer Condition Cutter Jam Error Power - Indicators Paper Blink 2 Table 3-1. Error Indications and Fault Occurrence Causes Ink 1-7 - EPSON Printer Window 3 Fault Occurrence Cause This error is detected if the paper could not be cut properly due to overload after Cutter operation but the Cutter could return to the home position. Cutter Position Error Off Blink 2 Blink 2 This error is detected if the paper cannot be cut properly due to overload during Cutter operation and the Cutter cannot return to the home position. "-" Blink Blink 2 : don't care : 0.5sec on + 0.5sec off repetition : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition High speed Blink Blink alternately 1 Blink alternately 2 : 0.1sec on + 0.1sec off repetition : 0.5sec on + 0.5sec off repetition : 0.5sec on + 0.5sec on repetition TROUBLESHOOTING Error Indications and Fault Occurrence Causes 76