Epson 2200 Service Manual - Page 156
Removing the Carriage Unit and Carriage Guide Shaft A, Oil Pad
![]() |
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
EPSON Stylus PHOTO 2100/2200 17. After facing the wider eccentric sides of the bearings on both ends of the Carriage Guide Shafts A and B toward the printer rear and front, respectively, to increase the distance between the Carriage Guide Shafts A and B, slightly lift the Carriage Unit and remove the Carriage Guide Shaft A to the diagonal top left of the Printer Mechanism. Carriage Guide Shaft B Carriage Unit Eccentric width (Wider) Eccentric width (Wider) Carriage Guide Shaft A Figure 4-79. Removing the Carriage Unit and Carriage Guide Shaft A C A U T IO N " When lifting the Carriage Unit, fully take care not to scratch the Carriage Guide Shaft B. Refer to Figure 4-79, "Removing the Carriage Unit and Carriage Guide Shaft A". Revision B C A U T IO N " When removing the Carriage Guide Shaft A from the Carriage Unit, fully use care not to lose the Oil Pad at the lower rear of the Carriage Unit. Refer to Figure 4-80, "Oil Pad". Oil Pad Figure 4-80. Oil Pad " Make sure that the left end of the Carriage Guide Shaft A is in order of the Bush, Shaft Fixing Plate (Left), Plain Spring and Leaf Spring. Refer to Figure 4-81, "Order on Left End of Carriage Guide Shaft A". Shaft Fixing Plate (Left) Plain Spring Bush DISASSEMBLY AND ASSEMBLY Leaf Spring Figure 4-81. Order on Left End of Carriage Guide Shaft A Disassembly 156
![](/manual_guide/products/epson-2200-service-manual-fb9e030/156.png)