Epson 2200 Service Manual - Page 79

EPSON Stylus PHOTO 2100/2200 Revision B Table 3-3. "Phenomenon-Based Communication Error Check Points" Occurrence Timing Phenomenon Detail At power-on The printer does not operate at all. Faulty Part/ Part Name Panel FFC Check Point 1. Check that the Panel FFC is connected to the connector of the Panel board correctly. Remedy 1. Connect the Panel FFC to the connector of the Panel board correctly. Panel board Panel FFC Panel board 2. Check the Panel FFC for damage. 1. Check the Panel board for damage. Power supply 1. Check that the connector cable of the Power supply board is board connected to CN15 on the Main board. Blue line 2. Change the Panel FFC for a new one. 1. Change the Panel board for a new one. 1. Connect the connector cable of the Power supply board to CN15 on the Main board. TROUBLESHOOTING CN15 2. Check that the blue-lined pin of the Power supply board connector cable is inserted into the 1 pin side. (Refer to the above photo.) 2. Connect the Power supply board connector cable with the blue-lined side placed on the 1 pin side. Troubleshooting 79