Epson 2200 Service Manual - Page 136
Removing the Hopper, Two Left and Right LD Roller Units
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
EPSON Stylus PHOTO 2100/2200 Revision B 9. Release the one left side hook that secures the Hopper, as viewed from the ASF Unit front, using tweezers or like. 10. While pulling up the left end of the Hopper as viewed from the ASF Unit front, remove the Arm on the right end of the Hopper from the cutout in the ASF Unit right end. 11. After sliding the Hopper, two left and right LD Roller Units, LD Roller Shaft and Left Hopper Cam together to the left, pull the right end to the front to remove the Hopper, two left and right LD Roller Units, LD Roller Shaft and Left Hopper Cam from the ASF Unit. Hook Hopper Arm LD Roller Units 12. Release one hook of the ASF Frame from the notch in the bottom left of the ASF Frame as seen from the ASF Unit rear, slide the ASF Frame to the right to release the one cutout in the bottom right side of the ASF Frame, and while avoiding the cutout, pull the ASF Under Frame to the diagonal bottom left to move it from the ASF Frame. ASF Frame Hooks Hooks Joggle Bottom left notch and hook ASF Under Frame Figure 4-33. Removing the ASF Under Frame Cutout Cutout Figure 4-32. Removing the Hopper, Two Left and Right LD Roller Units, LD Roller Shaft and Left Hopper Cam When reinstalling the ASF Under Frame, mount it securely to the six rear side hooks, one bottom right side cutout and rear side joggle. Refer to Figure 4-33, "Removing the ASF Under Frame". DISASSEMBLY AND ASSEMBLY Disassembly 136