Epson 2200 Service Manual - Page 74
High speed Blink, don't care - head cleaning
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
EPSON Stylus PHOTO 2100/2200 Revision B Printer Condition Ink Color Error Power - Table 3-1. Error Indications and Fault Occurrence Causes Indicators Paper - Ink 1-7 High speed Blink EPSON Printer Window 3 Fault Occurrence Cause This error is detected if Ink end/low occurs during printing and the new Ink cartridge inserted for ink change differs in color/type from the old Ink cartridge. Ink Level Low Error - - Blink This error is detected if the ink consumption reaches about 90%. "-" Blink Blink 2 CAUTION: If the EPW3 shows the error, printing can be continued until the printer is placed in the ink end status. However, you cannot perform head cleaning operation. : don't care : 0.5sec on + 0.5sec off repetition : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition High speed Blink Blink alternately 1 Blink alternately 2 : 0.1sec on + 0.1sec off repetition : 0.5sec on + 0.5sec off repetition : 0.5sec on + 0.5sec on repetition TROUBLESHOOTING Error Indications and Fault Occurrence Causes 74