Epson 2200 Service Manual - Page 86

EPSON Stylus PHOTO 2100/2200 Revision B Occurrence Timing Phenomenon Detail The Paper feed switch The CD-R tray is fed up to the was pressed at the Driven roller section toward the setting of the CD-R ASF, but is kept fed for some tray. time toward the ASF and is then (Only for Stylus ejected. PHOTO 2100) Table 3-5. Phenomenon-Based Paper Out Error Check Points Faulty Part/ Part Name PW sensor Check Point Remedy 1. Check that the PW sensor FFC is placed in the specified routing 1. Place the FFC, which is connected to the PW positions and does not make contact with any parts. sensor, in the specified routing positions. Connector PW sensor FFC 2. Check that the PW sensor FFC has not come off the connector of 2. Securely connect the PW sensor FFC to the the CR encoder board. (Refer to the above photo.) connector of the CR encoder board. TROUBLESHOOTING Troubleshooting 86