Epson 2200 Service Manual - Page 170

EPSON Stylus PHOTO 2100/2200 4.2.13.2 Removing the PF Motor 1. Remove the Printer Mechanism. (Refer to 4.2.1.4.) 2. Remove the Paper Guide Manual. (Refer to Steps 2 and 3 in 4.2.13.1.) 3. Disconnect the Connector Cable (CN16) of the PF Motor from the Main Board. (Refer to Steps 2 and 3 in 4.2.2.2.) 4. Release the two hooks that secure the Harness Clamp to the Under Frame, and remove the Harness Clamp from the Under Frame. 5. Release the Cable of the PF Motor from the Tie Wrap. Revision B 6. Remove the two screws 13) C.P.S 3×6 (6±1kgf.cm) that secure the PF Motor, and remove the PF Motor from the Left Frame. When removing only the PF Motor, peel the PF Scale carefully (using care not to whiten it) and remove the PF Motor, since there are the Spur Gear 76 and PF Scale. C A U T IO N Fully be careful not to damage (whiten or break) the Spur Gear 76 tooth surface and PF Scale. Refer to Figure 4-111, "Removing the PF Motor". Hooks Tie Wrap C.P.S 3×6 Harness Clamp Figure 4-110. Releasing the PF Motor Cable Spur Gear 76 PF Motor PF Scale Frame left side Figure 4-111. Removing the PF Motor DISASSEMBLY AND ASSEMBLY Disassembly 170