Epson 2200 Service Manual - Page 163
Removing the CD-R Sensor,
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
EPSON Stylus PHOTO 2100/2200 5. Remove the one screw 11) C.B.P 2.5×5 (1.5±0.25kgf.cm) that secures the PF Encoder Sensor, and remove the PF Encoder Sensor. PF Encoder Sensor C.B.P 2.5×5 Revision B 4.2.12.4 Removing the CD-R Sensor 1. Remove the Front Frame. (Refer to Steps 1 to 7 in 4.2.5.) 2. Release the two hooks that secure the CD-R Sensor, and remove the CD-R Sensor. CD-R Sensor Hooks Figure 4-94. Removing the PF Encoder Sensor " When reinstalling the PF Encoder Sensor, insert the two cutouts and then push the hook in. Refer to Figure 4-95, "Reinstalling the PF Encoder Sensor". " Pass the FFC of the PF Encoder Sensor through under the Arm of the PF Encoder Sensor Frame. Refer to Figure 4-95, "Reinstalling the PF Encoder Sensor". Arm Figure 4-96. Removing the CD-R Sensor " When connecting the Connector Cable to the CD-R Sensor, use tweezers and connect correctly. Refer to Figure 4-47, "Removing the Front Frame". " Connect the CD-R Sensor Connector Cable with the Tie Wraps of the Front Frame correctly. Refer to Figure 4-47, "Removing the Front Frame". FFC Cutouts Figure 4-95. Reinstalling the PF Encoder Sensor DISASSEMBLY AND ASSEMBLY Disassembly 163