Epson 2200 Service Manual - Page 179
Removing the Paper Eject Roller Shaft A, Removing the Combination Gear 17
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
EPSON Stylus PHOTO 2100/2200 Revision B CHECK P O IN T " The two projections of the Spur Gear 76 should come out of the round holes of the PF Scale. Refer to Figure 4-130, "Applying the PF Scale". " Make sure that the PF Scale is not dirty and is free from scratches. Refer to Figure 4-130, "Applying the PF Scale". 4.2.16 Removing the Paper Eject Roller Shaft A 1. Remove the PF Roller. (Refer to 4.2.15.) 2. Remove the C Ring that secures the Combination Gear 17, 24.5 of the Left Frame, and remove the Combination Gear 17, 24.5 from the Left Frame. 3. Remove the C Ring that secures the Spur Gear 43, and remove the Spur Gear 43 from the Paper Eject Roller Shaft A. " Since the Spur Gear A is a precision gear, change it for a new one once it has been removed. Refer to Figure 4-131, "Removing the Combination Gear 17, 24.5 and Spur Gear 43". " When reinstalling the Spur Gear 43 to the Paper Eject Roller Shaft A, hold the center of the Spur Gear 43 and install the Spur Gear 43 to the Paper Eject Roller Shaft A carefully. If you hold the periphery of the Spur Gear 43 to mount the Gear, the Gear will be deformed, reducing the paper loading accuracy. For reinstallation, it is recommended to press-fit the Spur Gear 43 using the PF Scale Mounting Jig, Tool No. 1051767. Refer to Figure 4-131, "Removing the Combination Gear 17, 24.5 and Spur Gear 43". DISASSEMBLY AND ASSEMBLY C Rings Combination Gear 17, 24.5 Left side face Spur Gear 43 Figure 4-131. Removing the Combination Gear 17, 24.5 and Spur Gear 43 Disassembly 179