Epson 2200 Service Manual - Page 121
Removing the Housings
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
EPSON Stylus PHOTO 2100/2200 Revision B 4.2.1 Removing the Housings 4.2.1.1 Removing the Upper Housing 1. Open the Printer Cover and Stacker. 2. Remove the two clips, which are fitted in the front of the Upper Housing as viewed from the printer front, by inserting a flat-blade screwdriver into the clip gaps. 3. Remove the four screws 1) C.B.S 3×14 (9±1kgf.cm) that secure the Upper Housing. Upper Housing Clips C.B.S 3×14 4. Release a total of six cutouts, which secure the Upper Housing, from the hooks of the Middle Housing. The left and right cutouts of the Upper Housing can be released easily by pushing them from inside the printer. To release the right-hand side cutouts, however, the CR Lock Lever must be moved to the front position, as viewed from the printer front, using tweezers or like and the CR Unit moved to near the printer center. C A U T IO N Fully be careful when handling the two cutouts on the left/right of the Upper Housing, as viewed from the printer front, since they are easily broken. Refer to Figure 4-4, "Hooks That Secure the Left and Right of the Upper Housing". Figure 4-3. Screws That Secure the Upper Housing Cutouts CR Unit CR Lock Lever Cutouts Figure 4-4. Hooks That Secure the Left and Right of the Upper Housing DISASSEMBLY AND ASSEMBLY Disassembly 121