HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 123

AG-1007 2 AG-1007 Message , [AG-1007], ,, WARNING, , FLOGI response not received for the N_Port connected to the fabric. Probable Cause Indicates the N_Port connected to the fabric switch is not online. The specified N_Port has been disabled. Recommended Check the connectivity between the Access Gateway N_Port and the fabric switch port. Action Severity WARNING AG-1008 Message , [AG-1008], ,, WARNING, , Invalid port login (PLOGI) response from the fabric on the N_Port . Probable Cause Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI) request sent by the Access Gateway. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port . Probable Cause Indicates there was a failure sending a Fabric Login (FLOGI) request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1010 Message Probable Cause , [AG-1010], ,, WARNING, , Sending PLOGI failed on N_Port . Indicates there was a failure sending an N_Port Login (PLOGI) request from the Access Gateway to the fabric switch. Fabric OS Message Reference 37 53-1002448-01