HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 449

FW-1169 45 Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables Action (SFPs) are not faulty. Severity INFO FW-1169 Message , [FW-1169], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has fallen below the low boundary. Loss of signal generally indicates a physical problem. A low number of signal loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has risen above the high boundary. Loss of signal generally indicates a physical problem. Recommended Check both ends of your cable connection. Verify that the cable is not faulty. Action Severity WARNING FW-1171 Message , [FW-1171], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of signal generally indicates a physical problem. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Severity INFO Fabric OS Message Reference 363 53-1002448-01