HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 528

48 HIL-1603 HIL-1603 Message , [HIL-1603], , FFDC, CRITICAL, , fans out of service. System is shutting down immediately. Probable Cause Indicates that the total fan failure count is greater than or equal to two. Recommended To avoid causing damage to the switch, the system shuts down automatically. To help prevent Action future problems, make sure that all the fans are working properly. Severity CRITICAL HIL-1605 Message , [HIL-1605], ,, INFO, , High temperature ( C), fan speed increasing per environmental specifications. Probable Cause Indicates that temperatures in the system have risen above the threshold and that the fan speed is being increased. Recommended No action required. Action Severity INFO HIL-1610 Message , [HIL-1610], ,, WARNING, , Fan/PS unit not supplying power, fan speeds may not be available. Please ensure that the unit has power and the switch is on. Probable Cause Indicates that the power supply is not connected to a power source or it is not switched on or the unit is faulty. Applicable only to Brocade 5100 and Brocade 6510. Recommended Ensure that the power cord is connected to the unit with a valid power source and then switch on Action the unit. If the problem persists, try reseating the unit. If the problem still persists replace the FRU. Severity WARNING HIL-1611 Message Probable Cause , [HIL-1611], , FFDC, CRITICAL, , MISMATCH in PSU-FAN Air Flow direction. Replace PSU with fan air flows in same direction. System will be shut down in 2 minutes. Indicates that PSU FAN Air Flows are in reverse direction. Could heat up the system. Replace PSU with airflow in same direction otherwise the system will shutdown. Applicable only to Brocade 6510. 442 Fabric OS Message Reference 53-1002448-01