HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 893

AUDIT FW System Messages Chapter 127 FW-1202 Message AUDIT, , [FW-1202], WARNING, FW, , , , , , is above high boundaries (High=, Low=). Current value is . Probable Cause Indicates that the number of C3 transmit time out frames is above high threshold. Recommended Check the target device; it could be slow. Action Severity WARNING FW-1274 Message AUDIT, , [FW-1274], INFO, FW, , , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of frame types or commands that the port receives has risen above the high boundary. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1402 Message AUDIT, , [FW-1402], WARNING, FW, , , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has risen above the high boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended Remove some unwanted files to create some flash space. Execute the supportSave command to Action remove files from the kernel space. Severity WARNING Fabric OS Message Reference 807 53-1002448-01