HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 138

4 ANV-1004 ANV-1004 Message , [ANV-1004], ,, ERROR, , S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. Probable Cause Indicates an internal error in the ASIC hardware that may degrade the data traffic. Recommended Restart the system at the next maintenance window. If the problem persists, replace the faulted Action blade. Severity ERROR ANV-1005 Message , [ANV-1005], ,, ERROR, , S,C,A: Memory allocation failed. Probable Cause Indicates memory allocation failure in the software. Recommended Restart the system at the next maintenance window. If the problem persists, replace the switch or Action contact your switch service provider. Severity ERROR ANV-1006 Message , [ANV-1006], ,, CRITICAL, , S,C: HW ASIC Chip fault. Type = 0x, Error = . Probable Cause Indicates an internal error in the ASIC hardware that renders the chip as not operational. Recommended Restart the system at the next maintenance window. If the problem persists, replace the faulted Action blade. Severity CRITICAL ANV-1007 Message , [ANV-1007], ,, CRITICAL, , S,C: ANVIL PASS 1 low buff pool fault: 0x. Probable Cause Indicates that Anvil Pass 1 is running out of free buffers, which may cause chip fault. Recommended Power cycle the faulted blade. If the problem persists, replace the faulted blade. Action Severity CRITICAL 52 Fabric OS Message Reference 53-1002448-01