HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 131

AG-1036 2 Recommended No action is required. Action Severity INFO AG-1036 Message , [AG-1036], ,, WARNING, ,Port is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check the admin guide for supported configuration. Probable Cause Indicates that one of the ports is connected to a non-Brocade fabric. Recommended No action is required. Action Severity WARNING AG-1037 Message , [AG-1037], ,, INFO, ,Trunked N_Port () going offline, if switchshow CLI for the connected fabric switch port displays "Persistently disabled: Area has been acquired", then check cabling: all trunked ports should be in same ASIC Port Group. Probable Cause Indicates that the cabling is incorrect. Recommended Action If the switchshow command on the connected fabric switch port displays "Persistently disabled: Area has been acquired", then check the cabling on the Access Gateway. All trunked ports in a single trunk should belong to the same application-specific integrated circuit (ASIC) port group. Severity INFO AG-1038 Message , [AG-1038], ,, ERROR, ,Elara Ports going to different fabrics, check N_Port . Probable Cause Indicates a misconfiguration. Recommended Connect all ports in the port group to the same fabric. Action Severity ERROR Fabric OS Message Reference 45 53-1002448-01