HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 203

CDR-1008 15 Recommended No action is required. Action Severity WARNING CDR-1008 Message , [CDR-1008], ,, WARNING, , S,C: HW ASIC Chip warning Level 1 type = 0x. Probable Cause Indicates an internal error in the ASIC hardware that may or may not degrade data traffic. Recommended Whenever this error occurs, restart the system at the next maintenance window. Action Severity WARNING CDR-1009 Message , [CDR-1009], ,, WARNING, , S,C: HW ASIC Chip warning Level 2 type = 0x. Probable Cause Indicates an internal error in the ASIC hardware that may or may not degrade data traffic. Recommended Whenever this error occurs, restart the system at the next maintenance window. Action Severity WARNING CDR-1010 Message , [CDR-1010], ,, CRITICAL, , S,C: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:, fault2: thresh2:0x. Probable Cause Indicates above normal errors observed in hardware that may or may not impact data traffic. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity CRITICAL Fabric OS Message Reference 117 53-1002448-01