HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 764

100 SSMD-1004 SSMD-1004 Message , [SSMD-1004], ,, ERROR, , Failed to unlock semaphore mutex: (). Probable Cause Indicates that the specified function has failed to unlock the mutex (semaphore). Recommended Restart or power cycle the switch. Action Severity ERROR SSMD-1005 Message , [SSMD-1005], ,, ERROR, , SSM start up failed. Probable Cause Indicates that Data Center Ethernet (DCE) SSM encountered an unexpected severe error during basic start up and initialization. Recommended Restart or power cycle the switch. If the probelm persists, download a new firmware using the Action firmwareDownload command. Severity ERROR SSMD-1006 Message , [SSMD-1006], ,, ERROR, , Error while configuring ACL on interface . Probable Cause Indicates that an error occurred while programming a TCAM entry on the specified interface. Recommended Try again after sometime. If the problem persists, execute the supportSave command and then Action restart or power cycle the switch. Severity ERROR SSMD-1007 Message Probable Cause , [SSMD-1007], ,, ERROR, , Error while removing ACL from interface . Indicates that an error occurred while programming a TCAM entry on the specified interface. 678 Fabric OS Message Reference 53-1002448-01