HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 844

115 ZONE-1022 ZONE-1022 Message , [ZONE-1022], ,, INFO, , The effective configuration has changed to . Probable Cause Indicates that the effective zone configuration has changed to the specified zone name. Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was Action not planned, take appropriate action as defined by your enterprise security policy. Severity INFO ZONE-1023 Message , [ZONE-1023], ,, INFO, , Switch connected to port () is busy. Retrying zone merge. Probable Cause Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the other side of the port is busy. Recommended If the problem persists, execute supportFtp (as needed) to set up automatic FTP transfers; then Action execute the supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message , [ZONE-1024], ,, INFO, , . Probable Cause Indicates that the cfgSave command has completed successfully. Recommended No action is required. Action Severity INFO ZONE-1026 Message , [ZONE-1026], ,, INFO, , port Out of CAM entries. Probable Cause Indicates that the total number of S_ID entries for creating or adding a zone group exceeds the limit. Recommended If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that Action port. Severity INFO 758 Fabric OS Message Reference 53-1002448-01