HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 344

37 FCR-1020 FCR-1020 Message , [FCR-1020], ,, WARNING, , Local LSAN zone entries for FC router exhausted; max limit: . Probable Cause Indicates that the number of logical storage area network (LSAN) zones created within a MetaSAN exceeds the local LSAN zone database limitations. Recommended Action Remove excess LSAN zones so that the number of LSAN zones created is within the range of local database limitations. To do that, perform the following steps: 1. Run the portDisable command to disable all the EX_Ports that got this error message. 2. Run the portDisable command to disable all the other EX_Ports on that FCR connected to the same edge fabrics the EX_ports disabled in step 1 are connected to. 3. Use Zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge fabrics. 4. Run portEnable on each EX_Port, one at a time, and verify that this error is not reported again. Severity WARNING FCR-1021 Message , [FCR-1021], ,, WARNING, , Local LSAN device entries exhausted. Probable Cause Indicates that the number of devices created through logical storage area network (LSAN) zones within the MetaSAN exceeds the local LSAN zone database limitations. Recommended Remove excess device entries within LSAN zones so that the number of devices is within the range Action of the local zone database limitations. Severity WARNING FCR-1022 Message , [FCR-1022], ,, ERROR, , Local proxy device slot entries exhausted. Probable Cause Indicates that the resources used to persistently store the proxy device slot to the remote world wide name (WWN) have been consumed. Recommended Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by Action removing logical storage area network (LSAN) zone entries. Severity ERROR 258 Fabric OS Message Reference 53-1002448-01