HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 489

FW-1438 45 FW-1438 Message , [FW-1438], ,, WARNING, , Switch status change contributing factor Missing SFPs: missing out of SFPs:config( percent,). (Port(s) ). Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the switchStatusPolicySet command. Recommended Execute the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty Action ports. Severity WARNING FW-1439 Message , [FW-1439], ,, WARNING, , Switch status change contributing factor Switch offline. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is offline. Recommended Execute the switchEnable command. Action Severity WARNING FW-1440 Message , [FW-1440], ,, INFO, , state has changed to . Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent. Recommended Verify that the event was planned. Action Severity INFO FW-1441 Message Probable Cause , [FW-1441], ,, INFO, , state has changed to . Indicates that the state of the specified field-replaceable unit (FRU) has changed to inserted. This means that an FRU is inserted but not powered on. Fabric OS Message Reference 403 53-1002448-01