HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 731

Chapter SNMP System Messages 96 SNMP-1001 Message , [SNMP-1001], ,, ERROR, , SNMP service is not available . Probable Cause Indicates that the Simple Network Management Protocol (SNMP) service could not be started because of the specified reason. Therefore, you will not be able to query the switch through SNMP. Recommended Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the Action specified reason is an initialization failure, restart the switch using the reboot command. Severity ERROR SNMP-1002 Message , [SNMP-1002], ,, ERROR, , SNMP initialization failed. Probable Cause Indicates that the initialization of the SNMP service has failed and therefore you will not be able to query the switch through SNMP. Recommended Restart or power cycle the switch. This will automatically initialize SNMP. Action Severity ERROR SNMP-1003 Message , [SNMP-1003], ,, ERROR, , Distribution of Community Strings to Secure Fabric failed. Probable Cause Indicates that the changes in the SNMP community strings could not be propagated to other switches in the secure fabric. Recommended Retry changing the SNMP community strings on the primary switch. Action Severity ERROR Fabric OS Message Reference 645 53-1002448-01