HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 639

Chapter PS System Messages 84 PS-1000 Message , [PS-1000], , FFDC, CRITICAL, , Failed to initialize Advanced Performance Monitoring. Probable Cause Indicates an unexpected software error has occurred in Advanced Performance Monitoring (APM). The performance monitor has failed to initialize. Recommended The control processor (CP) should restart (or fail over) automatically If this does not happen, restart Action or power cycle the switch to re-initiate the firmware. Severity CRITICAL PS-1001 Message Probable Cause Recommended Action Severity , [PS-1001], ,, INFO, , Advanced Performance Monitoring configuration updated due to change in PID format Indicates the PID format was changed. No action is required. Refer to the Fabric OS Administrator's Guide for more information on the PID format. INFO PS-1002 Message , [PS-1002], ,, INFO, , Failed to initialize the tracing system for Advanced Performance Monitoring. Probable Cause Indicates an unexpected software error has occurred in Advanced Performance Monitoring (APM). The performance monitor tracing system has failed to initialize. Recommended Tracing will not be available for Advanced Performance Monitoring (APM), but other functions will Action be normal. To activate tracing, restart (or fail over) the control processor (CP). Severity INFO Fabric OS Message Reference 553 53-1002448-01