HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 133

AN System Messages Chapter 3 AN-1001 Message , [AN-1001], ,, ERROR, , Failed to allocate memory: Probable Cause Indicates that the specified function has failed to allocate memory. Recommended Check memory usage on the switch using the memShow command. Restart or power cycle the Action switch. Severity ERROR AN-1002 Message , [AN-1002], ,, ERROR, , Failed to initialize; rc = . Probable Cause Recommended Action Indicates that the initialization of the trafd daemon has failed. Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity ERROR AN-1003 Message , [AN-1003], ,, WARNING, , Latency bottleneck on port /. pct. of secs. affected. Avg. time b/w transmits us. Avg. slowdown . Probable Cause For an F_Port, it indicates that the attached device is slow in responding to frames going out of this port. This latency may be inherent in the device or due to heavy workload on the device. For an E_Port, it indicates a downstream primary bottleneck. Recommended If the port is an F_Port, examine the connected device for the source of the latency. If the port is a Action long-distance E_Port, ensure that there are enough buffer credits to service the link distance. Severity WARNING Fabric OS Message Reference 47 53-1002448-01