HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 408

39 FICU-1004 FICU-1004 Message , [FICU-1004], ,, WARNING, , : Failed to set fabric manager server (FMS) mode: conflicting PID Format:, FMS Mode:. Probable Cause Indicates that a process ID (PID) format conflict was encountered. The core PID format is required for FICON-CUP. The pid_format variable displays the PID format currently running on the fabric, and is one of the following: • 0 - VC-encoded PID format • 1 - core PID format • 2 - extended-edge PID format The mode variable displays whether FICON Management Server (FMS) mode is enabled, and is one of the following: • 0 - FMS is enabled • 1 - FMS is disabled Recommended Action To enable FMS mode, the core PID format must be used in the fabric. Change the PID format to core PID using the configure command and then re-enable FMS mode using the ficonCupSet command. Severity WARNING FICU-1005 Message , [FICU-1005], ,, ERROR, , Failed to initialize , rc = . Probable Cause Indicates that the initialization of the specified module within the FICON-CUP daemon failed. Recommended Download a new firmware using the firmwareDownload command. Action Severity ERROR FICU-1006 Message , [FICU-1006], ,, WARNING, , Control Device Allegiance Reset: (Logical Path: 0x:0x). Probable Cause Indicates that the logical path with the specified PID and channel image ID lost allegiance to a FICON-CUP device. Recommended Check if the FICON channel corresponding to the PID in the message is functioning properly. Action Severity WARNING 322 Fabric OS Message Reference 53-1002448-01