HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 759

Chapter SS System Messages 99 SS-1000 Message , [SS-1000], ,, INFO, , supportSave has uploaded support information to the host with IP address . Probable Cause Indicates that the supportSave command was used to transfer support information to a remote location. Recommended No action is required. Action Severity INFO SS-1001 Message , [SS-1001], ,, WARNING, , supportSave's upload operation to host IP address aborted. Probable Cause Indicates that a file copy error has occurred during execution of the supportSave command. Complete error information cannot always be displayed in this message because of possible errors in subcommands being executed by the supportSave command. Recommended Check the remote server settings. Execute the supportFtp command to set the FTP or SCP Action parameters. After the problem is corrected, execute the supportSave command again. Severity WARNING SS-1002 Message , [SS-1002], ,, INFO, , supportSave has stored support information to the USB storage device. Probable Cause Indicates that the supportSave command was used to transfer support information to an attached USB storage device. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 673 53-1002448-01